The role of the tube machine in the work is getting more and more attention, so how to effectively improve its work efficiency? I believe that knowing how to maintain the tube machine can achieve efficiency. The following long-term pipe making machinery and everyone share the maintenance experience of the pipe making machine.
1. Always check the oil level on the fuel tank. The oil level should not be lower than the specified value.
2. When the fine oil filter is blocked by dirt, it needs to be replaced in time; when the coarse oil filter is blocked, it should be cleaned in time, once every 3 months.
3. To add oil to the fuel tank, it must be filtered. The oil should not be mixed with impurities such as moisture, rust, metal shavings and fibers.
4. When starting the oil pump in winter or cold area, it should be opened and stopped, repeated several times to increase the oil temperature, and then start working after the hydraulic pump station is running flexibly.
5. All knobs on the hydraulic pump station, non-operators should not move.
6. Always observe if the power supply voltage is abnormally fluctuating and check it every 3 months or so.
The correct maintenance of the pipe machine plays a very positive role in the efficiency and longevity of the equipment.