banner
Home » Product > Plastic Profile Machine > PVC Profile Machine
Product Categories
Contact Us
  • Qingdao Ruijie Plastic Machinery Co.,Ltd
  • Add: No.16,Shandong Road,Beiguan Industrial Zone, JiaoZhou City ,QingDao City ,Shandong Province, China
  • Mobile/Whatsapp/Wechat: +8615966899953; +8615506393026; +8613210263886

PVC Cable Trunking Profile Machine

PVC Cable Trunking Profile Machine General Introduction PVC cable trunking profile machine is suitable for producing all kinds PVC wire trunks in all sizes. It is widely used to produce the PVC electric conduit pipe wire and cable pipe, wire trunks and all kinds of profiles. It is the ideal...

Send InquiryChat Now

General Introduction

1.PVC cable trunking profile machine is suitable for producing all kinds PVC wire trunks in all sizes. It is widely used to produce the PVC electric conduit pipe wire and cable pipe, wire trunks and all kinds of profiles. It is the ideal system for unobtrusive cable management designed to cope with the rigours of the factory and office. Include forced feeder, conical twin screw extruder, mould, vacuum calibration & cooling table, haul off machine, stacker, punching machine.

2.This machine can also produce PVC window and door profiles, panel and decorative profiles by changing mould.

Machine Features

1.High capacity 
2.Long life 
3.High speed extrusion 
4.Low energy consumption

Process Flow

Raw material +additive → mixing → screw loader → conical twin-screw extruder → profile extrusion mould → vacuum calibration support → haul-off → cutter → rack →finished product

Models

Model

SJZ51

SJZ55

SJZ65

Max. width of products(mm)

200

300

300

Main extruder

SJZ51/105

 SJZ55/120

 SJZ65/132

Extrusion capacity(kg/h)

80-100

100-130

130-180

 Main motor power(kw)

18.5

22

 37

PVC Electric Cable Trunking Sizes

15×10

16×16

16×25

20×10

20×20

25×16

25×25

 

30×12

30×25

30×30

35×40

35×60

35×75

   

40×16

40×25

40×30

40×40

40×60

40×60

40×80

 

45×25

45×30

45×45

45×60

45×90

45×90

   

50×30

50×40

50×50

60×25

60×60

60×60

65×45

75×75

80×40

80×60

80×80

90×40

90×75

90×75

90×90

 

100×25

100×40

100×60

100×100

120×80

120×80

120×100

 

Trunking installation
1) The trough is flat without distortion, the inner wall has no burrs, the joints are tight and straight, and all kinds of accessories are complete.

2) The connection of the cable trough should be flat, the joints should be tight and straight, the trough cover should be flat, no warp angle, and the outlet port is in the correct position.

3) When the trunking passes through the deformation joint, the trunking itself should be disconnected, and the connecting slot should be connected in the trunking. It should not be fixed. The protective grounding wire should have a compensation margin. One wire bolt is fixed below the CT300*100 and Hengdan. Two bolts must be fixed above CT400*100.

4) All non-conductive parts of non-metal trunking should be connected and bridged accordingly to make them integral and make an overall connection.

5) The cable troughs laid in the shaft and the troughs passing through different fire zones shall be equipped with fire barriers according to the design requirements.

6) The length of the steel wire trough at the straight end exceeds 30m plus the expansion joint, and the cable trough is provided with a compensation device across the deformation joint.

7) The length of the metal cable trunking and its bracket shall be not less than 2 and connected to the ground (PE) or zero (PEN) trunk.

8) Both ends of the connecting plate between the non-galvanized cable ducts are connected to the copper core grounding wire, and the minimum allowable cross-sectional area of the grounding wire is not less than BVR-4 mm.

9) The two ends of the connecting plate between the galvanized cable ducts do not cross the grounding wire, but the two ends of the connecting plate are not less than two connecting fixing bolts with anti-loose nuts or anti-loose washers.

Machine Picture

Finished Product

Product Features

1.It is very simple and convenient to operate;

2.This machine has high production efficiency;

3.Good operating system;

4.Work does not produce a lot of noise;

5.Good durability.

PVC trunking, that is, PVC trunking (PVC = Polyvinylchlorid, polyvinyl chloride, a synthetic material), generally known as line trunking, wiring harness, wire trough, etc. PVC trunking is a kind of trunking. There are various types of trunking. Depending on the material, the trunking is divided into various types according to the wiring equipment industry. The commonly used environmentally friendly flame-retardant PVC trunking and halogen-free PPO Wire troughs, halogen-free PC/ABS trunking, metal wire troughs such as steel and aluminum, etc.

There are more varieties of plastic tanks, from the model: PVC - 2 0 series, PVC - 2 5 series, PVC - 2 5 F series, PVC - 3 0 series, PVC - 4 0 series, PVC - 4 0 Q series Wait. In terms of specifications, there are: 2 0 × 1 2, 2 5 × 1 2 . 5, 2 5 × 2 5, 3 0 × 1 5, 4 0 × 2 0 and so on. Accessories for the P V C slot are: male angle, female corner, straight corner, flat three-way, left three-way, right three-way, connector, terminal head, junction box (cassette, bright box). </p>
PVC trunking total (price can not be used as a valid basis) Specifications (mm) Unit price specification (mm) Unit price thickening type wire slot Ordinary wire slot 620×10A1.25 20×10B1.0924×14A1.70 24×14B1.4030×15A2 .24 39×19B2.6039×19A3.20 59×22B4.4059×22A5.80 120×8022.0050×25A6.00 160×10033.0060×40A8.00 200×10039.0080×40A11.00 200×16047.0080×50A13.00 300× 15080.00100×27A11.00 Curved groove floor trough 6100×40A13.00 No.1 3.67100×50A15.00 No. 2 (bottom width 3 cm) 4.67100×60A15.80 No. 3 (bottom width 4 cm) 6.67100×80A29.00 4 No. (bottom width 5 cm) 9.00100×100A39.00 No. 5 (bottom width 6 cm) 12.50150×50A39.00 No. 6 (bottom width 7 cm) 15.67 aluminum alloy arc groove 9 No. 7 (bottom width 8 cm) 22.702 (bottom width 3 cm) 45.20 3 (bottom width 4 cm) 53.60 8 (bottom width 9 cm) 23.504 (bottom width 5 cm) 62.00 9 (bottom width 10 cm) 32.006 (bottom width 7 cm) 92.00 35×108.80 48×1413.60

Machine Video

Hot Tags: PVC cable trunking profile machine, suppliers, manufacturers, factory, price

Inquiry